DESCRIPTION
Meeting all expectations set by its legendary name, the Gryphon model glider kit will be the "King of the Air". The Gryphon itself can soar to the height of 700 feet on an A10-3T engine. Upon reaching apogee, a colorful streamer acts as a tracking and recovery device to show where the rocket will land. During that time, the Gryphon's stealthy glider moves magically across the sky to serve as a protector to everything below and will also gracefully return to earth to be readied for another flight.
Made from lightweight paper tubing and laser-cut balsa, the Gryphon is a great first step above a beginner rocket. In about two hours, plus painting time, rocketeers will build a rocket that will garner attention in both the air and when on display.
WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, yellow glue, plastic cement, wax paper, hobby knife, masking tape, clear tape, primer (white), paint (gray, white) and clear coat (optional). (Tools, construction and finishing supplies not included.)
WHAT YOU NEED TO LAUNCH (sold separately): Estes Porta-Pad II Launch Pad with a 1/8 inch launch rod and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).
ADDITIONAL INFORMATION |
---|
Recommended Engines | A3-4T, 1/2A3-2T, A10-3T |
Projected Max Altitude | 700 ft. (213 m) |
Recovery System | 12 in. (30.5 cm) Streamer |
Length | 18 in. (45.7 cm) |
Wingspan | 6 in. (15.2 cm) |
Diameter | .54 in. (14 mm) |
Estimated Weight | .6 oz. (17 g) |
Estimated Assembly Time | 2 Hours (painting and glue drying time not included) |
Fin Materials | Laser cut wood |
Decal Type | Waterslide |
Launch System | Porta Pad II and Electron Beam Launch Controller |
Launch Rod Size | 1/8" |
Age Recommendation | Estes model rocketry is recommended for boys and girls ages 10+ with adult supervision for those under 12, and rocketeers of all ages. |
Level | Intermediate |